VANTO – The power in surgery
The operating system with transferable table tops Vanto boasts the most advanced technology which allows to satisfy the surgical positioning of patients, facilitates procedures in the operating theatre and answers to all the requirements of the different surgical specialties.
OPT 40/1 – Multifunctions plus
The operating table with fixed table tops OPT 40/1 has been conceived to satisfy every requirement of the operating theatre and can be easily used for any surgical specialty. It is a state-of-the-art table in its category in terms of functionality, safety and versatility.
ASSO – Life made simple
The operating table with transferable table tops Asso offers the possibility to reach even the most extreme positions and ensures the best exposure of the surgical site, respecting both patients and operators’ safety and comfort and adapting to all the requirements of the different surgical specialties.
OPT 30/1 – Multifunctions
The operating table with fixed table tops OPT 30/1 is simple and flexible, can be used in all surgical procedures and thus it can satisfy all the different needs of an operating table. It is extremely user friendly and easily movable.
Accessories for Orthopaedics / Traumatology
OPT boasts a wide set of accessories for orthopaedics and traumatology, such as:
Back plates for shoulder surgery – Shoulder arthroscopy devices – Humerus, elbow and hand positioning devices – Hip prothesis devices for lateral and supine position – Arthroscopy devices and knee prothesis – Lower limbs traction devices – Carbon fibre lower limbs traction devices – Devices for tibia surgery – Plaster devices
BACK PLATE FOR SHOULDER SURGERY
With two lateral adjustable and removable parts, for free positioning and access to the shoulder.
BACK PLATE FOR SHOULDER SURGERY
With two lateral adjustable and removable parts, for free positioning and access to the shoulder.
BACK PLATE FOR SHOULDER SURGERY
With two lateral adjustable and removable parts, for free positioning and access to the shoulder.
SUPPORTING BAR FOR HEADRESTS
To be used with headrest or helmet headrest together with the back plate for shoulder surgery; or to be used with headrest and the connecting adapters.
HELMET-SHAPED HEADREST
To be used with supporting bar and back plate for shoulder surgery.
MODULAR HELMET HEADREST
To be used with supporting bar and back plate for shoulder surgery. The headrest is modular, with 2 easily removable lateral parts to facilitate anaesthesia of the patient.
PADDED BODY STRAP
Fixing system for the patient in beach-chair position to the side rails of the back plate for shoulder surgery. Washable, length 1.900 mm and width on the padded point 150 mm.
LATERAL SUPPORT FOR SHOULDER SURGERY
Support complete with lateral body and cushion to be used for shoulder surgery in beach-chair position and as back support. Dimensions 509 mm height x 150 mm diameter, complete with clamp.
PLATE FOR HUMERUS SURGERY
Radiolucent, to use with patient in prone position. It is complete with cushion. To be fitted onto back plate for shoulder surgery.
HEIGHT ADJUSTABLE PLATE FOR HUMERUS SURGERY
Radiolucent, orientable on ball-and-socket joint, to use with patient in prone position. Complete with cushion and clamp for side rails. Height adjustment range of 150 mm.
ADJUSTABLE HUMERUS SUPPORT
Radiolucent with height range of 160 mm and longitudinal range 110 mm adjustment. Complete with cushion from 40 mm, and clamp for side rails.
HUMERUS AND FOREARM POSITIONING DEVICE
With patient in supine position, made of a countertraction post, positioning system and hand traction. Complete with 2 clamps.
LIGHT SHOULDER ARTHROSCOPY DEVICE
With double traction system, tiltable, extensible, height adjustable and fully orientable on clamp. Complete with strings, straps and clamp.
OPT ARM
Patient positioning device for arthroscopic surgery. OPT Arm is used to safely move and hold the patient’s arm during surgery.
DISPOSABLE KIT FOR OPT ARM
Disposable kit for OPT Arm complete with sterile drape made of velcro, a sterile cloth to cover the accessory and a sterile fixing tape.
ARM SUPPORT SURGERY TABLE FOR OPT ARM
Thanks to this plate it is possible to do in a safe and easy way the elongation of the patient’s arm into the lateral and park bench positions.
COUNTERTRACTION ARM FOR OPT ARM
To be used together with OPT Arm.
HAND SURGERY TABLE
Completely radiolucent, height adjustement range 55 mm, complete with antistatic cushion, traction device and clamp.
ARM AND HAND SURGERY TABLE
Extremely resistent and light, easy to use and completely radiolucent. Height adjustable for a correct alignment with the operating table. Complete with antistatic cushion and 2 clamps. Dimensions: 760 x 380 mm.
HIP PROTHESIS POSITIONING DEVICE
It is made of 2 height adjustable iliac crest tampon supports and 1 orientable and height adjustable sacral support. Complete with fast locking clamps to be fitted onto the side rails.
MEDACTA ADAPTER
Medacta device for MIS hip surgery. To be attached to traction group.
MENISCUS POSITIONING DEVICE
Mounted on square section bar, without knee lateral supports, with clamp included.
KNEE POSITIONING DEVICE WITH LATERAL ADJUSTABLE SUPPORTS WITH CLAMP
Mounted on square section bar, with swivelling lateral adjustement supports, with clamp included.
KNEE ARTHROSCOPY DEVICE
Tiltable, height adjustable, with width regulation. Complete with padded belt and clamp.
FOLDABLE KNEE ARTHROSCOPY DEVICE
Reclinable, spreadable, with tiltable adjustable lateral supports, complete with padding and clamp.
SLIDING ROLLER SUPPORT FOR KNEE PROTHESIS
Height adjustable +/- 55 mm. and length adjustable 340 mm. For a safe and precise patient positioning.
SLIDING POSITIONER FOR KNEE PROTHESIS
Height and length adjustable and complete with ball joint that allows to flex, stretch, recline and rotate the patient’s leg. Complete with clamp and a kit of disposable drapes.
CARBON FIBRE HIP PROTHESIS DEVICE
Made of carbon fibre and completed with foamed pad. To be used with patient in supine position for a complete radiotransparency and wirh removable and interchangeable leg supports.
TRUNCH AND THORAX PLASTER DEVICE
Complete with vertical support which is height adjustable, with fork scapular supports and headrest for adults and childrens.
PELVIC – PODALIC ACCESSORY
In radiolucent material. Complete with countertraction post and spatula supports for adults and children. Possibility of being attached to the operating table and/or traction group.
PELVIS PLASTER DEVICE
Complete with countertraction post and spatula supports for adults and children. To be attached to the lower limbs traction device.
LOWER LIMBS TRACTION DEVICE
Complete with:
• 1 fixed pelvis support;
• 1 pair of tiltable and removable buttock support;
• 1 pair removable leg supports;
• 1 traction arm with screw tension device, indifferently left or right;
and complete with the following:
• 1 countertraction bar with cylindrical cushion;
• 1 adult traction boot – size M;
• 1 single Goepel knee crutch;
• 1 clamp for Goepel knee crutch.
RADIOLUCENT CARBON FIBRE LOWER LIMBS TRACTION DEVICE
Complete with:
• 1 radiolucent fixed pelvis support;
• 1 countertraction bar.
CARBON FIBRE ROTATED TRACTION BAR
It can be used indifferently left or right and is complete with n.1 clamp for positioning the screw tension device. The traction bar with rotated arm allows a better exposure to the x- ray thanks to a configuration that avoids stacking the carbon fibre layers.
SINGLE TRACTION ARM
Complete with:
• 1 stirrup;
• 2 ankle leather cuffs (1 for adults and 1 for children);
• 1 plate for positioning the safe leg.
SCREW TENSION DEVICE
For the second traction arm.
SCREW TENSION DEVICE WITH HORIZONTAL ADJUSTMENT
For the second traction arm.
PAIR OF TRACTION LEG SUPPORTS
Legs section for traction support with sphere graft. Not tiltable. Advised for lower limbs traction device or for hip prothesis device.
REMOVABLE TRACTION STANDING DEVICE LEG/BAR
For the lower limbs traction device.
TRACTION BOOT (SINGLE)
To be fixed to a metal plate on a ball-and-socket joint. To be used with lower limbs traction device, it can be used on both right and left foot.
ANKLE LEATHER CUFFS (PAIR)
To be used with lower limbs traction device.
ELONGATION BAR
Complete with clamp.
POPLITEUS HOLDER ARCH (SINGLE)
For lower limbs traction device, complete with clamp.
RADIOLUCENT POPLITEUS HOLDER PLATE (SINGLE)
For lower limbs traction device, radiolucent and complete with clamp.
L-SHAPED COUNTER TRACTION AND PELVIS SUPPORT POST
To be used on lower limbs traction device with patient in lateral decubitus.
CYLINDRICAL CUSHION FOR HIP ARTHROSCOPY
For hip arthroscopy with diameter 200 mm.
TIBIA NAILING DEVICE
With popliteus support, complete with cushions and height adjustable. To be fitted onto lower limbs traction device with the possibility of adjusting the leg inclination.
RADIOLUCENT PELVIS SURGERY DEVICE
To be used with tractioned limbs. Specialistic device completely radiolucent on its central part for pelvis surgery and fracture.
COUNTERTRACTION DEVICE FOR OBESES
Support for countertraction bar to be fitted on lower limbs traction device.
CLAMP FOR TRACTION DEVICE
Square clamp for arm height traction.
STIRRUP TRACTION DEVICE
For models Martin, Aescolap, etc.
RIGID TRACTION DEVICE WITH STIRRUP
To be used with traction arm and screw tension device. Can be rotated and tilted.
TROLLEY FOR MOUNTED TRACTION DEVICE
Complete with wire mesh basket, dimension 600 mm x 600 mm x 300 h mm.
PREPARATION FOR TROLLEYS FOR LOWER LIMBS TRACTION DEVICE TO BE USED WITH A SINGLE TRACTION ARM
Preparation device for trolleys for lower limb traction device that allows to move safely the tractions with a single traction arm.
CUBE TROLLEY FOR DISMOUNTED TRACTION DEVICE
For the rapid and tidy storage of the entire traction system.
CUBE TROLLEY DISMOUNTED CARBON FIBRE TRACTION DEVICE
For the rapid and tidy storage of the entire dismounted traction system.
