5-icon

Products

VANTO – The power in surgery

The operating system with transferable table tops Vanto boasts the most advanced technology which allows to satisfy the surgical positioning of patients, facilitates procedures in the operating theatre and answers to all the requirements of the different surgical specialties.

OPT 40/1 – Multifunctions plus

The operating table with fixed table tops OPT 40/1 has been conceived to satisfy every requirement of the operating theatre and can be easily used for any surgical specialty. It is a state-of-the-art table in its category in terms of functionality, safety and versatility.

ASSO – Life made simple

The operating table with transferable table tops Asso offers the possibility to reach even the most extreme positions and ensures the best exposure of the surgical site, respecting both patients and operators’ safety and comfort and adapting to all the requirements of the different surgical specialties.

OPT 30/1 – Multifunctions

The operating table with fixed table tops OPT 30/1 is simple and flexible, can be used in all surgical procedures and thus it can satisfy all the different needs of an operating table. It is extremely user friendly and easily movable.

Accessories for Orthopaedics / Traumatology

3 icon_100

OPT boasts a wide set of accessories for orthopaedics and traumatology, such as:

Back plates for shoulder surgery – Shoulder arthroscopy devices – Humerus, elbow and hand positioning devices – Hip prothesis devices for lateral and supine position – Arthroscopy devices and knee prothesis – Lower limbs traction devices – Carbon fibre lower limbs traction devices – Devices for tibia surgery – Plaster devices

GBF065

BACK PLATE FOR SHOULDER SURGERY

With two lateral adjustable and removable parts, for free positioning and access to the shoulder.

9907061

BACK PLATE FOR SHOULDER SURGERY

With two lateral adjustable and removable parts, for free positioning and access to the shoulder.

9907071

BACK PLATE FOR SHOULDER SURGERY

With two lateral adjustable and removable parts, for free positioning and access to the shoulder.

9924024_1

SUPPORTING BAR FOR HEADRESTS

To be used with headrest or helmet headrest together with the back plate for shoulder surgery; or to be used with headrest and the connecting adapters.

9905034

HELMET-SHAPED HEADREST

To be used with supporting bar and back plate for shoulder surgery.

9905058

MODULAR HELMET HEADREST

To be used with supporting bar and back plate for shoulder surgery. The headrest is modular, with 2 easily removable lateral parts to facilitate anaesthesia of the patient.

9914013_new

PADDED BODY STRAP

Fixing system for the patient in beach-chair position to the side rails of the back plate for shoulder surgery. Washable, length 1.900 mm and width on the padded point 150 mm.

9908029-1

LATERAL SUPPORT FOR SHOULDER SURGERY

Support complete with lateral body and cushion to be used for shoulder surgery in beach-chair position and as back support. Dimensions 509 mm height x 150 mm diameter, complete with clamp.

9906031

PLATE FOR HUMERUS SURGERY

Radiolucent, to use with patient in prone position. It is complete with cushion. To be fitted onto back plate for shoulder surgery.

9909013

HEIGHT ADJUSTABLE PLATE FOR HUMERUS SURGERY

Radiolucent, orientable on ball-and-socket joint, to use with patient in prone position. Complete with cushion and clamp for side rails. Height adjustment range of 150 mm.

9909010

ADJUSTABLE HUMERUS SUPPORT

Radiolucent with height range of 160 mm and longitudinal range 110 mm adjustment. Complete with cushion from 40 mm, and clamp for side rails.

GBF056

HUMERUS AND FOREARM POSITIONING DEVICE

With patient in supine position, made of a countertraction post, positioning system and hand traction. Complete with 2 clamps.

9907072

LIGHT SHOULDER ARTHROSCOPY DEVICE

With double traction system, tiltable, extensible, height adjustable and fully orientable on clamp. Complete with strings, straps and clamp.

CF007885 A - 99070770

OPT ARM

Patient positioning device for arthroscopic surgery. OPT Arm is used to safely move and hold the patient’s arm during surgery.

CF007885 B - 9907077S

DISPOSABLE KIT FOR OPT ARM

Disposable kit for OPT Arm complete with sterile drape made of velcro, a sterile cloth to cover the accessory and a sterile fixing tape.

CF007889 - 9907077D

ARM SUPPORT SURGERY TABLE FOR OPT ARM

Thanks to this plate it is possible to do in a safe and easy way the elongation of the patient’s arm into the lateral and park bench positions.

CF007888 - 9907077E

COUNTERTRACTION ARM FOR OPT ARM

To be used together with OPT Arm.

9909002-004

HAND SURGERY TABLE

Completely radiolucent, height adjustement range 55 mm, complete with antistatic cushion, traction device and clamp.

CF007891 - 9909014

ARM AND HAND SURGERY TABLE

Extremely resistent and light, easy to use and completely radiolucent. Height adjustable for a correct alignment with the operating table. Complete with antistatic cushion and 2 clamps. Dimensions: 760 x 380 mm.

9908027

HIP PROTHESIS POSITIONING DEVICE

It is made of 2 height adjustable iliac crest tampon supports and 1 orientable and height adjustable sacral support. Complete with fast locking clamps to be fitted onto the side rails.

9925027

MEDACTA ADAPTER

Medacta device for MIS hip surgery. To be attached to traction group.

9907003

MENISCUS POSITIONING DEVICE

Mounted on square section bar, without knee lateral supports, with clamp included.

9907032

KNEE POSITIONING DEVICE WITH LATERAL ADJUSTABLE SUPPORTS WITH CLAMP

Mounted on square section bar, with swivelling lateral adjustement supports, with clamp included.

GBF054

KNEE ARTHROSCOPY DEVICE

Tiltable, height adjustable, with width regulation. Complete with padded belt and clamp.

9907075

FOLDABLE KNEE ARTHROSCOPY DEVICE

Reclinable, spreadable, with tiltable adjustable lateral supports, complete with padding and clamp.

9909009

SLIDING ROLLER SUPPORT FOR KNEE PROTHESIS

Height adjustable +/- 55 mm. and length adjustable 340 mm. For a safe and precise patient positioning.

9907079

SLIDING POSITIONER FOR KNEE PROTHESIS

Height and length adjustable and complete with ball joint that allows to flex, stretch, recline and rotate the patient’s leg. Complete with clamp and a kit of disposable drapes.

9923069-58

CARBON FIBRE HIP PROTHESIS DEVICE

Made of carbon fibre and completed with foamed pad. To be used with patient in supine position for a complete radiotransparency and wirh removable and interchangeable leg supports.

9923051

TRUNCH AND THORAX PLASTER DEVICE

Complete with vertical support which is height adjustable, with fork scapular supports and headrest for adults and childrens.

9923071

PELVIC – PODALIC ACCESSORY

In radiolucent material. Complete with countertraction post and spatula supports for adults and children. Possibility of being attached to the operating table and/or traction group.

9923057-079

PELVIS PLASTER DEVICE

Complete with countertraction post and spatula supports for adults and children. To be attached to the lower limbs traction device.

CF007856 - 9923052P

LOWER LIMBS TRACTION DEVICE

Complete with:
• 1 fixed pelvis support;
• 1 pair of tiltable and removable buttock support;
• 1 pair removable leg supports;
• 1 traction arm with screw tension device, indifferently left or right;
and complete with the following:
• 1 countertraction bar with cylindrical cushion;
• 1 adult traction boot – size M;
• 1 single Goepel knee crutch;
• 1 clamp for Goepel knee crutch.

9923065

RADIOLUCENT CARBON FIBRE LOWER LIMBS TRACTION DEVICE

Complete with:
• 1 radiolucent fixed pelvis support;
• 1 countertraction bar.

CF007850 - 9923066 ex 9923066M

CARBON FIBRE ROTATED TRACTION BAR

It can be used indifferently left or right and is complete with n.1 clamp for positioning the screw tension device. The traction bar with rotated arm allows a better exposure to the x- ray thanks to a configuration that avoids stacking the carbon fibre layers.

026 - 9923053

SINGLE TRACTION ARM

Complete with:
• 1 stirrup;
• 2 ankle leather cuffs (1 for adults and 1 for children);
• 1 plate for positioning the safe leg.

9923049

SCREW TENSION DEVICE

For the second traction arm.

9923077

SCREW TENSION DEVICE WITH HORIZONTAL ADJUSTMENT

For the second traction arm.

9923064 - traz

PAIR OF TRACTION LEG SUPPORTS

Legs section for traction support with sphere graft. Not tiltable. Advised for lower limbs traction device or for hip prothesis device.

9923045

REMOVABLE TRACTION STANDING DEVICE LEG/BAR

For the lower limbs traction device.

9918003 - traz

TRACTION BOOT (SINGLE)

To be fixed to a metal plate on a ball-and-socket joint. To be used with lower limbs traction device, it can be used on both right and left foot.

9912001-2-3

ANKLE LEATHER CUFFS (PAIR)

To be used with lower limbs traction device.

9919003

ELONGATION BAR

Complete with clamp.

9902014

POPLITEUS HOLDER ARCH (SINGLE)

For lower limbs traction device, complete with clamp.

9902017

RADIOLUCENT POPLITEUS HOLDER PLATE (SINGLE)

For lower limbs traction device, radiolucent and complete with clamp.

9924026

L-SHAPED COUNTER TRACTION AND PELVIS SUPPORT POST

To be used on lower limbs traction device with patient in lateral decubitus.

9924704

CYLINDRICAL CUSHION FOR HIP ARTHROSCOPY

For hip arthroscopy with diameter 200 mm.

9924027

TIBIA NAILING DEVICE

With popliteus support, complete with cushions and height adjustable. To be fitted onto lower limbs traction device with the possibility of adjusting the leg inclination.

9923055

RADIOLUCENT PELVIS SURGERY DEVICE

To be used with tractioned limbs. Specialistic device completely radiolucent on its central part for pelvis surgery and fracture.

CF007847 - 9923078

COUNTERTRACTION DEVICE FOR OBESES

Support for countertraction bar to be fitted on lower limbs traction device.

CF007859 - 9901016

CLAMP FOR TRACTION DEVICE

Square clamp for arm height traction.

9923062

STIRRUP TRACTION DEVICE

For models Martin, Aescolap, etc.

GBF061

RIGID TRACTION DEVICE WITH STIRRUP

To be used with traction arm and screw tension device. Can be rotated and tilted.

CF007846 - 9920050-9920052

TROLLEY FOR MOUNTED TRACTION DEVICE

Complete with wire mesh basket, dimension 600 mm x 600 mm x 300 h mm.

9920050S

PREPARATION FOR TROLLEYS FOR LOWER LIMBS TRACTION DEVICE TO BE USED WITH A SINGLE TRACTION ARM

Preparation device for trolleys for lower limb traction device that allows to move safely the tractions with a single traction arm.

9920026

CUBE TROLLEY FOR DISMOUNTED TRACTION DEVICE

For the rapid and tidy storage of the entire traction system.

9920055

CUBE TROLLEY DISMOUNTED CARBON FIBRE TRACTION DEVICE

For the rapid and tidy storage of the entire dismounted traction system.

 

Go to our Facebook page
Go to our Linkedin page
Go to our Youtube channel